The advancement of crossdocking has led to the attention on shorter cycle inventory time. Hence, floor flatness should be able to hold through on the long physically demanding 24-hour traffic. Moreover, floor flatness or concrete levelness takes on an integral part in the current high level of throughput logistics. One that didn't accomplish optimum floor flatness can forever hold one's heavy industrial equipment and vehicles from reaching their most effective performance. In the beginning, appropriate floor flatness is very important for it will be way much successful for any operation if the lift trucks are operating at their highest speed. Often times, the poor surface will slowly result in the intensive vibration of the lift truck by which adds up to the maintenance and down time. Floor flatness can also be good for the operator's fatigue and health and safety. Additionally, it may lessen the deterioration towards the stock and first and foremost, permits control on the general quality of the floor that you are building. Unarguably, the most essential category in an industry in which there's a dire necessity of floor flatness is within the aisles of warehouse with high density wherein extremely narrow aisles and defined path trucks operate. To highlight the importance of floor flatness, it is significant to keep in mind that some manufacturers of lift truck do not bring about newly bought lift trucks unless specific floor flatness and levelness are achieved. This is because of the fact that almost all of the lift trucks are not designed with pneumatic tires or a suspension system that can take in numerous degrees of bumps. Therefore, the expense for the warranty repair with inferior type of floors will be greater and often times significantly expensive. Any abrupt change in the floor migh result to wheels becoming airborne in times of optimum running rate. This will cause premature failure and excessive stress on the general unit.