As a heavy machine operator, you have many duties and a lot of things can go wrong. This is why you must have a lot of training to ensure that you are qualified for the position. There are many things that can go wrong while operating heavy machinery, and rigging training aims to cover all of the areas that could possibly go wrong. Some aspects of training 1) Probably one of the most harmful hazards in crane procedures is the accidental drop. 'Position load' is easily the most standard reason for these accidents. This happens when you find issues with the position from the load and also the ground. The very best policy would be to keep your position under 10% and ideally at zero. When the position surpasses 10% the burden can slip leading to an accidental drop. 2) A vital aspect of rigging training is learning how to choose the correct equipment, wires and ropes. Wire slings have to be looked over for worn wires, the finishes for corrosion and breakage, kinks, crushed wires and relaxing strands. Chain slings are utilized with very heavy loads and when it's hot because hot temperatures don't damage them very easily. When utilizing a sling make sure to look into the places that metal rubs metal to search for possible damages from the rubbing. 3) Metallic mesh slings can be used with loads which have sharp edges because they do not cut them as quickly. Plus, the big top of the mesh creates high weight-bearing capacity. An artificial sling is easily the most flexible sling and it is used when loads have to be protected against damage because of sensitive surfaces. Their versatility also reduces stress and harm to rigs. 90% of crane accidents occur because of human error. Crane and rigging operators have 1000's of dollars in equipment and inventory together with the lives of co-employees in their hands. Proper crane safety and rigging safety training is imperative in each and every place of work that utilizes this equipment. I hope this article was helpful and informative in explaining to you why heavy machine operators and crane operators need to have extensive rigging training before they are on the job. At the end of the day, these companies have to watch out for their best interests, as well as the safety of everyone involved. Being a crane operator has many benefits, and the pay is pretty good. After you complete your training, you will become a valuable asset to the company you work for. With rigging training, you will be an important member of the team, good luck to you!